Kisling ergo® 4900 Thread Locker cure accelerator is an accelerator for the Kisling range of anaerobic thread lockers, this is highly recommended whenever you need fast curing. The accelerator must be applied at least two minutes before the glue will be used, usually on one side of the joint, but sometimes even on both, it is important to a allow the solvent to evaporate totally, before the glue may be applied. This product will accelerate the curing process of all thread locker to within seconds, it will also assist when inactive metals are used on screw fixings or the gap is to large to fully cure under normal conditions. Furthermore it may be found useful to apply on top of possibly squeezed out excess of glue, in order to cure it totally.

Key Product Features and Benefits:

– Product Shelf Life: 12 Months (At Room Temp)

All ergo.® hazard-free adhesives and sealants bear the Kisling sustainability label. This label stands for highest quality, performance and sustainability in all phases of the product life cycle, from purchase to production and manufacturing to disposal.

Product Guide
Technical Bulletin

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.