BOFA’s A1030487 Combined Filter is for use with BOFA 3D PrintPRO HT. This filter is compatible with the ‘Purge’ section of the unit, which is an open-loop intermittent operation, at a fixed airflow of 30 m³h, which filters both particulate and gases.
The frequency with which you need to change your filter will be determined by the specific application you are using your fume extraction systems for. As a guideline, we recommend that filters ‘in use’ are replaced every 12 months (both pre and combined or bag/HEPA) or when filter indication screen or LED lights state a blockage. Please note, this is a guide only as each filter will depend on the specific application it is being applied to. Take precautions when changing used filters for new ones. Ensure Personal Protective Equipment is worn and consult your local authority for correct disposal of contaminated filters.
The life of the BOFA A1030487 combined filter depends on how much soldering is carried out. If for example soldering is performed for 6 hours a day then a change should be considered after 9 – 12 months. The carbon absorbs moisture so regardless of the length of time soldering the HEPA Gas filter should be changed after no longer than 12 months.
This part is supplied as an individual Combined HEPA/Gas Filter.
Compatible Systems:
– BOFA 3D PrintPRO HT
Reviews
There are no reviews yet.