Conformal Coating Thinners
MG Chemicals’ conformal coating thinners are non-reactive diluents used to thin down conformal coatings to a sprayable viscosity, reducing most common coating defects.
Thinners
MG Chemicals’ conformal coating thinners are non-reactive diluents used to thin down conformal coatings to a sprayable viscosity. When added in the proper ratios, these thinners help ensure coatings achieve good surface coverage and film esthetic. They help avoid common coating defects like pin holes, cratering, boiling marks and orange peel. Please consult the specific conformal coating’s TDS for recommended thinner and dilution ratios.
A full range of Conformal Coatings including silicone, epoxy, acrylic, polyurethane, and UV Curable are also available. For advice on your application contact our Sales Office to speak to our technical team.
| Products | Colour | Evaporation Rate | VOC Content | Application |
|---|---|---|---|---|
| 435 | Clear | Fast | 8% | Dilute EMI/RFI shielding coating products Improves adhesion to plastics |
| 4351 | Clear | Moderately Fast | 800 g/L | Dilute EMI/RFI shielding coating products Improve film coalescence |
| 4352 | Clear | Moderate | 100% | Compatible with acrylic, alkyd, cellulose acetate butyrate, epoxy, nitrocellulose, or polyester resins. |
| 4354 | Clear | Slow | 100% | Spray applications Oil and grease remover. |