Thermally Conductive Adhesives
MG Chemicals Thermal Interface Materials work by displacing air gaps between components and heat sinks to help conduit heat out of the circuit, preventing overheating and ultimately circuit failure.
Thermal Adhesives
MG Chemicals offers thermally conductive epoxy adhesives for bonding heat sinks, LEDs, and other heat generating electronic components. They feature strong adhesion to metal, good adhesion to plastics, and excellent physical strength. MG Chemicals Thermal Adhesives are available in both 1 or 2 part formats, dependent on your application and mixing capabilities.
When choosing a Thermal Solution, consider requirements including conductivity, working time, adhesion, and processing to find the right material. For advice on your application contact our Sales Office to speak to our technical team.
One-Part Adhesives
| Product | Colour | Curing time (min @ 80°C) | Tensile strength (N/mm2) | Temp range (°C) | Conductivity W/(m·K) | Hardness |
|---|---|---|---|---|---|---|
| 9460TC | White | 120 | 9.1 | -65 to 150 | 0.8 | 86D |
Two-Part Adhesives
| Product | Conductivity W/(m·K) | Mix Ratio by Volume | Tensile strength (N/mm2) | Temperature range (°C) | Curing time (min @ 65°C) | Working Time | Hardness |
|---|---|---|---|---|---|---|---|
| 8329TFF | 0.8 | 1:1 | 13 | -40 to 150 | 15 | 5 min | 82D |
| 8349TCM | 1.4 | 1:1 | 10 | -40 to 150 | 60 | 45 min | 77D |
| 8329TFS | 1.2 | 1:1 | 4.2 | -40 to 150 | 180 | 4 h | 68D |
| 8329TCS | 1.4 | 1:1 | 11 | -40 to 150 | 120 | 4 h | 62D |
| 8329HTC | 0.9 | 1:1 | 34 | -55 to 160 | 60 | 80–120 min | 86D |