Solder Connection

Solutions in Soldering Technology

Tip Info

SMTC-X147
Tip Type : Speciality
This speciality tip is designed drag soldering. The end of the tip is concave, simply melt a little solder into the recess and apply to the lead out. Then procede to smoothly slide from lead to lead to create a perfect joint.Ideal for replacing gull wing devices and removing solder shorts.

SMTC-5
£ 35.50
SMTC-0
£ 35.50
SMTC-1
£ 35.50
More Info

STTC-X36
Tip Type : Chisel
Chisel tip 30 degrees2.5 mm

For medium to heavy load joints requiring extra reach.

STTC-5
£ 20.70
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 20.70
More Info

STTC-X22
Tip Type : Conical
Conical sharp tip 0.4 mm Wide.

This sharp tip cartridge is ideal for soldering small SMT components or fine wire applications (would not be suitable for through hole soldering)

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X37
Tip Type : Chisel
Chisel Tip 30 degrees 1.78 mm

Excellent first choice for your new system. Will tackle a wide variety of tasks.

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X38
Tip Type : Chisel
Chisel Tip 30 degrees 1.5 mm

A finer version of the STTC-137 Ideal for medium to light through hole and general surface mount touch up.

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X25
Tip Type : Chisel
Chisel tip 30 degrees 1.0 mm wide

Good for a variety of light soldering tasks. Looking for a Surface Mount touch up tip? The STTC-125 should be your first choice .

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X07
Tip Type : Conical
Conical sharp tip 1.0mm wide

General purpose SMT and through hole tip when access is limited.

STTC-5
£ 20.70
STTC-0
£ 20.70
STTC-1
£ 20.70
STTC-8
£ 20.70
More Info

STTC-X06
Tip Type : Conical
Conical Sharp Tip 0.4 mm wide. Long reach. For limited access SMT assembly and rework.

STTC-806 is a specialist tip which is not generally stocked. These are available on a 20 working day lead time

STTC-5
£ 20.70
STTC-0
£ 20.70
STTC-1
£ 20.70
STTC-8
£ 20.70
More Info

STTC-X40
Tip Type : Sharp
Sharp Tip Bent 30 degrees 0.4 mm wide.

The bend in the tip makes it much easier to work on small circuits and PLCC

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X45
Tip Type : Bevel
An extended length fine tip for surface mount or fine wire applications would not be ideal for general through hole tasks. Bevel tip 60 degree 0.4 mm.

STTC-845 is a specialist tip which is not generally stocked. These are available on a 10 working day lead time

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X17
Tip Type : Chisel
Extra large chisel tip 5.0 mm wide.

STTC-5
£ 20.70
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 20.70
More Info

STTC-X65
Tip Type : Chisel
Large chisel Long reach 5.0 mm wide

STTC-5
£ 22.70
STTC-0
£ 22.70
STTC-1
£ 22.70
STTC-8
£ 22.70
More Info

STTC-X20
Tip Type : Chisel
Long reach chisel 3.8 mm wide.

STTC-820 is a specialist tip which is not generally stocked. These are available on a 20 working day lead time.

STTC-0
£ 24.90
STTC-1
£ 24.90
STTC-8
£ 24.90
More Info

STTC-X13
Tip Type : Chisel
Chisel tip 90 degrees 3.0 mm wide

STTC-5
£ 20.70
STTC-0
£ 20.70
STTC-1
£ 20.70
STTC-8
£ 20.70
More Info

STTC-X42
Tip Type : Chisel
Long reach Chisel soldering tip 60 degrees 1.78 mm wide.

STTC-842 is a specialist tip which is not generally stocked. These are available on a 10 working day lead time

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X98
Tip Type : Chisel
Chisel tip, Bent, 30 degrees 1.78 mm wide

STTC-898 is a specialist tip which is not generally stocked. These are available on a 10 working day lead time

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X99
Tip Type : Chisel
Chisel Tip, Bent , 1.5 mm wide

STTC-899 is a specialist tip which is not generally stocked. These are available on a 20 working day lead time

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X41
Tip Type : Chisel
Chisel Tip 30 degrees 1.3 mm wide.

STTC-5
£ 22.00
STTC-0
£ 22.00
STTC-1
£ 22.00
STTC-8
£ 22.00
More Info

STTC-X01
Tip Type : Conical
Conical sharp tip. 1.0 mm wide.

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
More Info

STTC-X31
Tip Type : Conical
Conical Sharp soldering Tip. 1.0 mm wide.

STTC-5
£ 24.90
STTC-0
£ 24.90
STTC-1
£ 24.90
More Info

STTC-X43
Tip Type : Conical
Conical Sharp Soldering Tip 0.5 mm wide.

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X11
Tip Type : Conical
Conical Soldering Tip. 0.5 mm wide.

STTC-5
£ 24.60
STTC-0
£ 24.60
STTC-1
£ 24.60
More Info

STTC-X16
Tip Type : Conical
Conical Soldering Tip.0.5 mm wide.

STTC-5
£ 22.70
STTC-0
£ 22.70
STTC-1
£ 22.70
STTC-8
£ 22.70
More Info

STTC-X44
Tip Type : Sharp
Sharp Soldering Tip Bent 30 degrees 0.5 mm wide.

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X26
Tip Type : Sharp
Sharp soldering Tip Bent 30 degrees. 0.4 mm wide.

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X14
Tip Type : Bevel
Bevel soldering Tip 45 degrees. 2.03 mm wide.

STTC-5
£ 20.70
STTC-0
£ 20.70
STTC-1
£ 20.70
More Info

STTC-X35
Tip Type : Bevel
Bevel Soldering Tip. 30 degrees . 1.78 mm wide.

STTC-5
£ 22.00
STTC-0
£ 22.00
STTC-1
£ 22.00
More Info

STTC-X47
Tip Type : Bevel
Bevel soldering Tip. 60 degrees 1.78 mm wide.

is a specialist tip which is not generally stocked. These are available on a 20 working day lead time

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X05
Tip Type : Bevel
Bevel Soldering Tip 30 degrees 1.78 mm wide.

STTC-5
£ 22.70
STTC-0
£ 22.70
STTC-1
£ 22.70
More Info

SMTC-X61
Tip Type : Speciality
This speciality tip at 15.75 mm wide can be used for in line soldering over a number of lead outs or for cleaning up BGA and SMD pads when used in conjunction with solder braid.

SMTC-5
£ 85.80
SMTC-0
£ 73.20
SMTC-1
£ 70.50
SMTC-8
£ 75.30
More Info

SMTC-X60
Tip Type : Speciality
This speciality tip at 10.41 mm wide can be used for in line soldering over a number of lead outs or for cleaning up BGA and SMD pads when used in conjunction with solder braid.

SMTC-5
£ 85.80
SMTC-0
£ 73.20
SMTC-1
£ 70.50
SMTC-8
£ 75.30
More Info

SMTC-X62
Tip Type : Speciality
This speciality tip at 22.10 mm wide can be used for in line soldering over a number of lead outs or for cleaning up BGA and SMD pads when used in conjunction with solder braid.

SMTC-5
£ 85.80
SMTC-0
£ 73.20
SMTC-1
£ 70.50
SMTC-8
£ 75.30
More Info

SMTC-X147
Tip Type : Speciality
This speciality tip is designed drag soldering. The end of the tip is concave, simply melt a little solder into the recess and apply to the lead out. Then procede to smoothly slide from lead to lead to create a perfect joint.Ideal for replacing gull wing devices and removing solder shorts.

SMTC-5
£ 35.50
SMTC-0
£ 35.50
SMTC-1
£ 35.50
More Info

SMTC-X170
Tip Type : Speciality
This speciality long reach tip is designed drag soldering. The end of the tip is concave, simply melt a little solder into the recess and apply to the lead out. Then procede to smoothly slide from lead to lead to create a perfect joint.Ideal for replacing gull wing devices and removing solder shorts.

SMTC-0
£ 37.50
SMTC-1
£ 37.50
More Info

SMTC-X167
Tip Type : Speciality
This speciality mini-hoof tip is designed drag soldering. The end of the tip is concave, simply melt a little solder into the recess and apply to the lead out. Then procede to smoothly slide from lead to lead to create a perfect joint.Ideal for replacing gull wing devices and removing solder shorts.

SMTC-8167 is a specialist tip which is not generally stocked. These are available on a 20 working day lead time.

SMTC-0
£ 35.50
SMTC-1
£ 35.50
SMTC-8
£ 35.50
More Info

SMTC-X169
Tip Type : Speciality
This speciality long reach tip is designed drag soldering. The end of the tip is concave, simply melt a little solder into the recess and apply to the lead out. Then procede to smoothly slide from lead to lead to create a perfect joint.Ideal for replacing gull wing devices and removing solder shorts.

SMTC-0
£ 37.50
SMTC-1
£ 37.50
More Info

SMTC-X161
Tip Type : Knife
The knife tip geometry with a tinned area 2.03 mm can be used in a similiar way to that of the hoof tip range in that it is designed to remove solder shorts and reflow the solder joints on a number of lead outs.

SMTC-5
£ 50.10
SMTC-0
£ 45.20
SMTC-1
£ 43.70
More Info

SMTC-X173
Tip Type : Knife
This knife tip with an increased tinned area is suitable for drag soldering and debridging between component devices.

SMTC-8173 is a specialist tip which is not generally stocked. These are available on a 15 working day lead time

SMTC-5
£ 50.10
SMTC-0
£ 50.10
SMTC-1
£ 45.20
More Info

SMTC-X171
Tip Type : Conical
Designed to remove 0201 and 0402 components from a topside angle. This design increases microscope viewing when reworking / removing micro chip capacitors /components.

SMTC-5
£ 50.10
SMTC-0
£ 50.10
SMTC-1
£ 50.10
SMTC-8
£ 50.10
More Info

SMTC-X172
Tip Type : Hoof
Designed for fine drag soldering and point to point soldering.This tip increases access between components and allows for lead to lead or solder bridge clean-up

SMTC-5
£ 50.10
SMTC-0
£ 45.20
SMTC-1
£ 43.70
SMTC-8
£ 45.20
More Info

SMTC-X174
Tip Type : Hoof
Long reach micro hoof tip designed with a smaller surface area than the mini hoof for optimal drag soldering of components intight spots.

SMTC-5
£ 37.50
SMTC-0
£ 37.50
SMTC-1
£ 37.50
More Info

SMTC-X175
Tip Type : Hoof
Micro-hoof tip designed with a smaller surface area than the mini hoof drag soldering of small / micro leaded components.

SMTC-5
£ 37.50
SMTC-0
£ 37.50
SMTC-1
£ 37.50
SMTC-8
£ 37.50
More Info

STTC-X90
Tip Type : Conical
Microfine tip designed for soldering and touch-up of micro components such as 0201 and 0402.

STTC-5
£ 19.40
STTC-0
£ 19.40
STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X01P
Tip Type : Conical
Conical Sharp 1mm

These tips are only available in the 700 series temperature range.

STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X25P
Tip Type : Chisel
Chisel 30 degrees 1mm wide.

This tip is available in 700 and 800 series temperature range.

STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X36P
Tip Type : Chisel
Chisel 30 degrees 2.5 mm wide

This soldering cartridge is available in 700 and 800 series temperature range.

STTC-1
£ 19.40
STTC-8
£ 20.50
More Info

STTC-X37P
Tip Type : Chisel
Chisel 30 degrees 1.8 mm wide.

This soldering cartridge is available in 700 and 800 series temperature range.

STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X45P
Tip Type : Conical
Conical 0.4 mm

This soldering cartridge is only available in 700 series temperature range.

STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X47P
Tip Type : Bevel
Bevel 60 degrees 1.78 mm wide

This soldering cartridge is only available in 700 series temperature range.

STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X173P
Tip Type : Knife
Knife 5.0 mm wide

This soldering cartridge is only available in 700 series temperature range.

STTC-1
£ 50.10
STTC-8
£ 50.10
More Info

SMTC-X118
Tip Type : Quad
Compatible with MX-500, MX-5000, and MX-5200 systems / MX-RM3E and MX-H1-AV hand-pieces.

A = 15.49mm A2 = 14.48mm D = 2.79mm B = 15.49mm B2 = 14.48mm

SMTC-0
£ 74.40
SMTC-1
£ 62.90
More Info

STTC-X38P
Tip Type : Chisel
Chisel 30° P = Optimised geometry for best thermal performance 1.4mm x 6.0mm (.055" x .24")

STTC Cartridges provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 & MX-5200 Systems and with the MX-RM3E and MX-H1-AV Hand-pieces. 700 Series for most standard applications.

STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X38P
Tip Type : Chisel
Chisel 30° P = Optimised geometry for best thermal performance 1.4mm x 6.0mm (.055" x .24")

STTC Cartridges provide a wide range of options for through-hole and SMD Rework. For use with the MX-500 and MX-5000 & MX-5200 Systems and with the MX-RM3E and MX-H1-AV Hand-pieces. 700 Series for most standard applications.

STTC-1
£ 19.40
STTC-8
£ 19.40
More Info

STTC-X88
Tip Type : Slot
For Chip 0402, 0603, 0805 - Slot cartridge for use with Metcal MX Series Soldering & Rework with MX-RM3E and MX-H1-AV Hand-pieces for conduction rework of surface mount components. The slot cartridges are used for the removal of discrete and passive devices. 600 Series for temperature sensitive applications.

STTC-5
£ 41.20
STTC-0
£ 41.20
STTC-1
£ 39.20
More Info

SMTC-X05
Tip Type : Slot
For SOT-23 - Slot cartridge for use with Metcal MX Series Soldering & Rework with MX-RM3E and MX-H1-AV Hand-pieces for conduction rework of surface mount components. The slot cartridges are used for the removal of discrete and passive devices. 500 Series for temperature sensitive applications.

SMTC-0
£ 37.80
SMTC-1
£ 36.10
SMTC-5
£ 41.20
More Info

SMTC-X03
Tip Type : Slot
For Chip 1812 - Slot cartridge for use with Metcal MX Series Soldering & Rework with MX-RM3E and MX-H1-AV Hand-pieces for conduction rework of surface mount components. The slot cartridges are used for the removal of discrete and passive devices. 500 Series for temperature sensitive applications.

SMTC-5
£ 41.20
SMTC-0
£ 37.80
SMTC-1
£ 37.80
More Info

SMTC-X02
Tip Type : Slot
For Chip 1206,1210 - Slot cartridge for use with Metcal MX Series Soldering & Rework with MX-RM3E and MX-H1-AV Hand-pieces for conduction rework of surface mount components. The slot cartridges are used for the removal of discrete and passive devices. 700 Series for most standard applications.

SMTC-5
£ 41.20
SMTC-0
£ 37.80
SMTC-1
£ 36.10
More Info

SMTC-X01
Tip Type : Slot
For Chip 0805 - Slot cartridge for use with Metcal MX Series Soldering & Rework with MX-RM3E and MX-H1-AV Hand-pieces for conduction rework of surface mount components. The slot cartridges are used for the removal of discrete and passive devices. 700 Series for most standard applications.

SMTC-5
£ 37.80
SMTC-0
£ 37.80
SMTC-1
£ 36.10
More Info

SMTC-X64
Tip Type : Blade
Short 5mm (.20") - Features and Benefits: Blade cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The blade cartridges are designed to allow effective and quick cleaning of PCB pads. 600 Series for temperature sensitive applications.

SMTC-0
£ 85.80
SMTC-1
£ 70.50
More Info

SMTC-X43
Tip Type : Quad
For QFP 100 Rectangular - Features and Benefits: Rework Quad Cartridges for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The quad cartridges are used for the removal of four-sided devices such as QFP and PLCC. 600 Series for temperature sensitive applications.

SMTC-1
£ 96.20
More Info

SMTC-X44
Tip Type : Quad
For QFP 100 Square Features and Benefits: Rework Quad Cartridges for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The quad cartridges are used for the removal of four-sided devices such as QFP and PLCC. 700 Series for most standard applications.

SMTC-1
£ 96.20
More Info

SMTC-X13
Tip Type : Quad
For PLCC 28 Features and Benefits: Rework Quad Cartridges for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The quad cartridges are used for the removal of four-sided devices such as QFP and PLCC. 600 Series for temperature sensitive applications.

SMTC-1
£ 64.20
More Info

SMTC-X14
Tip Type : Quad
For PLCC 44 Features and Benefits: Rework Quad Cartridges for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The quad cartridges are used for the removal of four-sided devices such as QFP and PLCC. 600 Series for temperature sensitive applications.

SMTC-0
£ 74.40
SMTC-1
£ 62.90
More Info

SMTC-X16
Tip Type : Quad
For PLCC 32 Features and Benefits: Rework Quad Cartridges for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The quad cartridges are used for the removal of four-sided devices such as QFP and PLCC. 700 Series for most standard applications.

SMTC-0
£ 74.40
SMTC-1
£ 62.90
More Info

SMTC-X17
Tip Type : Quad
For PLCC 52 Features and Benefits: Rework Quad Cartridges for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The quad cartridges are used for the removal of four-sided devices such as QFP and PLCC. 700 Series for most standard applications.

SMTC-1
£ 106.00
More Info

SMTC-X159
Tip Type : Quad
For TQFP 44 Features and Benefits: Rework Quad Cartridges for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The quad cartridges are used for the removal of four-sided devices such as QFP and PLCC. 600 Series for temperature sensitive applications.

SMTC-1
£ 74.40
More Info

SMTC-X120
Tip Type : Quad
For SQFP 64 (EIJA) Features and Benefits: Rework Quad Cartridges for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The quad cartridges are used for the removal of four-sided devices such as QFP and PLCC. 600 Series for temperature sensitive applications.

SMTC-0
£ 74.40
SMTC-1
£ 62.90
More Info

SMTC-X121
Tip Type : Quad
For SQFP 48 (EIJA) Features and Benefits: Rework Quad Cartridges for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The quad cartridges are used for the removal of four-sided devices such as QFP and PLCC. 600 Series for temperature sensitive applications.

SMTC-0
£ 74.40
SMTC-1
£ 62.90
More Info

SMTC-X04
Tip Type : Tunnel
For SOIC-8 Features and Benefits: Tunnel cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The tunnel cartridges are used for the removal of multi-lead, two-sided components such as SOICs, SOJs and TSOPs. 600 Series for temperature sensitive applications.

SMTC-0
£ 43.70
SMTC-1
£ 41.20
More Info

SMTC-X06
Tip Type : Tunnel
For SOIC-14,16 Features and Benefits: Tunnel cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The tunnel cartridges are used for the removal of multi-lead, two-sided components such as SOICs, SOJs and TSOPs. 600 Series for temperature sensitive applications.

SMTC-0
£ 43.70
SMTC-1
£ 41.20
More Info

SMTC-X07
Tip Type : Tunnel
For SOIC-28 Features and Benefits: Tunnel cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The tunnel cartridges are used for the removal of multi-lead, two-sided components such as SOICs, SOJs and TSOPs. 600 Series for temperature sensitive applications.

SMTC-0
£ 47.50
SMTC-1
£ 41.60
More Info

SMTC-X09
Tip Type : Tunnel
For SOIC-24 Features and Benefits: Tunnel cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The tunnel cartridges are used for the removal of multi-lead, two-sided components such as SOICs, SOJs and TSOPs. 600 Series for temperature sensitive applications.

SMTC-0
£ 49.40
SMTC-1
£ 49.40
More Info

SMTC-X10
Tip Type : Tunnel
For SOIC-20 Features and Benefits: Tunnel cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The tunnel cartridges are used for the removal of multi-lead, two-sided components such as SOICs, SOJs and TSOPs. 600 Series for temperature sensitive applications.

SMTC-0
£ 47.50
SMTC-1
£ 43.80
More Info

SMTC-X26
Tip Type : Tunnel
For SOJ-28, SOM-32 Features and Benefits: Tunnel cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The tunnel cartridges are used for the removal of multi-lead, two-sided components such as SOICs, SOJs and TSOPs. 700 Series for most standard applications.

SMTC-1
£ 49.40
More Info

SMTC-X47
Tip Type : Tunnel
For DPAC Features and Benefits: Tunnel cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The tunnel cartridges are used for the removal of multi-lead, two-sided components such as SOICs, SOJs and TSOPs. 600 Series for temperature sensitive applications.

SMTC-0
£ 58.50
SMTC-1
£ 58.50
More Info

SMTC-X142
Tip Type : Tunnel
For SOIC-14 Features and Benefits: Tunnel cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The tunnel cartridges are used for the removal of multi-lead, two-sided components such as SOICs, SOJs and TSOPs. 600 Series for temperature sensitive applications.

SMTC-0
£ 47.50
SMTC-1
£ 47.50
More Info

SMTC-XBL100
Tip Type : Blade
Short 10mm (.40") Features and Benefits: Blade cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The blade cartridges are designed to allow effective and quick cleaning of PCB pads.

SMTC-1
£ 80.80
SMTC-8
£ 80.80
More Info

SMTC-XBL150
Tip Type : Blade
Short 15mm (.59") Features and Benefits: Blade cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The blade cartridges are designed to allow effective and quick cleaning of PCB pads.

SMTC-8
£ 80.80
More Info

SMTC-XBL250
Tip Type : Blade
Long 25mm (1.0") Features and Benefits: Blade cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The blade cartridges are designed to allow effective and quick cleaning of PCB pads.

SMTC-8
£ 89.80
More Info

SMTC-XBL350
Tip Type : Blade
Long 35mm (1.38") Features and Benefits: Blade cartridge for use with Metcal MX Series Soldering & Rework with MX-H1-AV and MX-RM3E Hand-pieces for conduction rework of surface mount components. The blade cartridges are designed to allow effective and quick cleaning of PCB pads.

SMTC-8
£ 89.80
More Info

UFTC-XDRH412
Tip Type : Hoof
Hoof Micro 1.2mm x 5.1mm (.048" x .20")

UFTC-7
£ 23.80
More Info