Metcal's BVX-201 is a two operator, PRE-HEPA-GAS volume extraction system designed to be used adjacent to the workbenches. This Metcal unit incorporates an audible warning system highlighting to the operator if the extraction level is dropping below the recommended efficiency level.
Key Product Features and Benefits:
Product Comprises of:
Please note this is the unit ONLY. If arms are required in your application please see Metcal BVX-201-KIT or Metcal BVX-201-KIT1. Arms may also be bought separately.
Currently in stock : 0 Lead Time : 10 Days
Health & Safety
Q - How often should l change my filters?
A - The BVX unit has both prefilters and a main filter. Depending on use we recommend that the pre- filters are inspected and changed if neccasary every month. The main filter will need to be changed every 9 to 12 months.
Q - My main reason for extraction will be for solder fumes, which filter system should l use?
A - The BVX extraction range of equipment is primarily designed for solder fume filtration which incorporates a HEPA filter with a small amount of activated carbon to neutralise odours before retuning to the work place.
Q - I would like to find a filtration system that would be suitable for use with conformal coating applications when used on a bench?
A - The BVX range of filtration systems 103, 103S and 203,203S are designed for solvent extraction. This unit is fitted with a Deep Bed Gas Filter which will absorb and neutralise a wide range of solvents.