Kisling ergo® 5100 Accelerator is specifically designed for cyanoacrylates adhesives (Super Glues). The accelerator ergo® 5100 should be applied at least two minutes before the glue will be used, usually on one side of the joint. In order to get highest strength, the solvent must be evaporated totally, before the glue may be applied. This product will greatly accelerate the curing process of cyanoacrylates and is recommended whenever curing within a second if required or if inactive materials like some metals or too cure large gaps which would normally avoid curing correctly.
The glue should always be applied to the untreated part. Furthermore it may be used on top of possibly squeezed out excess of glue or on big open areas, as it is normal in the filter industry (bonding of mesh on metallic frames), in order to cure it totally.
Key Product Features and Benefits:
All ergo.® hazard-free adhesives and sealants bear the Kisling sustainability label. This label stands for highest quality, performance and sustainability in all phases of the product life cycle, from purchase to production and manufacturing to disposal.