Solder Connection

Solutions in Soldering Technology


Anaerobic Adhesives (Thread Lockers)

Kisling ergo® Thread lockers are designed to securely connect two or more components to each other, even under load. Dynamic axial or transverse loads result in relative movements that lead to a loss of the pre-stress. This loss – coupled with the eventual failure of the screw connection – cannot be prevented long term, even with the use of ribbed washers, toothed washers and spring washers.

Kisling ergo “All For One” medium thread locker will ensure a long lasting secure connection, covering all metal alloys and offers long lasting strength under many different dynamic loads and vibration scenarios.

Kisling also offers an additional range of thread lockers for more extreme environmental conditions depending on your specific application. Contact our Sales Team below to discuss your application.


Contact for Further Information

ergo® Anaerobic Adhesives

Product
Designation
Viscosity (mPas)
Breakaway Torque (Nm)
Prevailing Torque (Nm)
Compressive Shear Strength (N/mm2)
Max. gap (mm)
Max Thread Size
Temperature range
(°C)

Final Strength at 25°C (hrs)
Approvals
4505
Medium Strength
55000 – 80000
10-2010-156-130.5
M80
-55 to 150
3-61/3


ergo® Auxiliary Products for Anaerobic Adhesives

Product
Designation

Colour
Package Size
4900
Activator
Turquoise
100g / 1Kg


Approvals/Registrations:
1) NSF - ANSI 61 = Approved for use in contact with drinking water.
2) NSF - P1 = Listed for use in food processing areas, without direct contact to food.
3) DVGW / DIN EN751-1 = Approved for use in threaded gas leading connections. According to DVGW TRGI 2008, in Germany not allowed for use in household gas-installations.
4) KTW = Complies with the guide formulation of the German Federal Environment Agency, published 2016, February 11th, for use in contact with drinking water.