|
|
|
TATC-X01
Designed for the removal of all discrete and SO symmetrical components. TACT tips can only be used in the Talon hand piece and are sold in pairs.
|
|
|
|
|
|
TATC-X02
Designed for the removal of all discrete and SO symmetrical components. TACT tips can only be used in the Talon hand piece and are sold in pairs. 6.35 mm wide
|
|
|
|
|
|
TATC-X03
Designed for the removal of all discrete and SO symmetrical components. TACT tips can only be used in the Talon hand piece and are sold in pairs. 15.75 mm wide
|
|
|
|
|
|
TATC-X04
Designed for the removal of all discrete and SO symmetrical components. TACT tips can only be used in the Talon hand piece and are sold in pairs. 20.57 mm wide
|
|
|
|
|
|
TATC-X05
Designed for the removal of TSOP 32 devices. TACT tips can only be used in the Talon hand piece and are sold in pairs.
|
|
|
|
|
|
TATC-X06
Designed for the removal of all discrete and SO symmetrical components. TACT tips can only be used in the Talon hand piece and are sold in pairs. 27.94 mm wide
|
|
|
|
|
|
TATC-X08
Angled Viper Tip 1.27 mm wide
|
|
|
|
|
STTC-X36
Chisel tip 30 degrees2.5 mm
For medium to heavy load joints requiring extra reach.
|
|
|
|
|
STTC-X37
Chisel Tip 30 degrees 1.78 mm
Excellent first choice for your new system. Will tackle a wide variety of tasks.
|
|
|
|
|
STTC-X38
Chisel Tip 30 degrees 1.5 mm
A finer version of the STTC-137 Ideal for medium to light through hole and general surface mount touch up.
|
|
|
|
|
STTC-X25
Chisel tip 30 degrees 1.0 mm wide
Good for a variety of light soldering tasks. Looking for a Surface Mount touch up tip? The STTC-125 should be your first choice .
|
|
|
|
|
STTC-X07
Conical sharp tip 1.0mm wide
General purpose SMT and through hole tip when access is limited.
|
|
|
|
|
STTC-X22
Conical sharp tip 0.4 mm Wide.
This sharp tip cartridge is ideal for soldering small SMT components or fine wire applications (would not be suitable for through hole soldering)
|
|
|
|
|
STTC-X06
Conical Sharp Tip 0.4 mm wide. Long reach
For limited accesss SMT assembly and rework.
|
|
|
|
|
STTC-X40
Sharp Tip Bent 30 degrees 0.4 mm wide.
The bend in the tip makes it much easier to work on small circuits and PLCC
|
|
|
|
|
STTC-X45
Bevel tip 60 degree 0.4 mm.
An extended length fine tip for surface mount or fine wire applications would not be ideal for general through hole tasks.
|
|
|
|
|
STTC-X65
Large chisel Long reach 5.0 mm wide
|
|
|
|
|
STTC-X17
Extra large chisel tip 5.0 mm wide.
|
|
|
|
|
STTC-X20
Long reach chisel 3.8 mm wide.
|
|
|
|
|
STTC-X03
Chisel tip 90 degrees 3.0 mm wide
|
|
|
|
|
STTC-X13
Chisel tip 90 degrees 3.0 mm wide
|
|
|
|
|
STTC-X33
Chisel tip 2.5 mm wide
|
|
|
|
|
STTC-X04
Chisel tip 90 degrees 1.78 mm wide.
|
|
|
|
|
STTC-X42
Long reach Chisel soldering tip 60 degrees 1.78 mm wide.
|
|
|
|
|
STTC-X98
Chisel tip, Bent, 30 degrees 1.78 mm wide
|
|
|
|
|
STTC-X99
Chisel Tip, Bent , 1.5 mm wide
|
|
|
|
|
STTC-X41
Chisel Tip 30 degrees 1.3 mm wide.
|
|
|
|
|
STTC-X83
Conical tip , grooved 2.0 mm wide.
|
|
|
|
|
STTC-X32
Conical sharp tip 1.78 mm wide.
|
|
|
|
|
STTC-X02
Conical sharp tip. 1.78 mm wide.
|
|
|
|
|
STTC-X31
Conical Sharp soldering Tip. 1.0 mm wide.
|
|
|
|
|
STTC-X43
Conical Sharp Soldering Tip 0.5 mm wide.
|
|
|
|
|
STTC-X12
Conical soldering Tip 2.03 mm wide.
|
|
|
|
|
STTC-X11
Conical Soldering Tip. 0.5 mm wide.
|
|
|
|
|
STTC-X16
Conical Soldering Tip.0.5 mm wide.
|
|
|
|
|
STTC-X01
Conical sharp tip. 1.0 mm wide.
|
|
|
|
|
STTC-X44
Sharp Soldering Tip Bent 30 degrees 0.5 mm wide.
|
|
|
|
|
STTC-X26
Sharp soldering Tip Bent 30 degrees. 0.4 mm wide.
|
|
|
|
|
STTC-X14
Bevel soldering Tip 45 degrees. 2.03 mm wide.
|
|
|
|
|
STTC-X35
Bevel Soldering Tip. 30 degrees . 1.78 mm wide.
|
|
|
|
|
STTC-X47
Bevel soldering Tip. 60 degrees 1.78 mm wide.
|
|
|
|
|
STTC-X05
Bevel Soldering Tip 30 degrees 1.78 mm wide.
|
|
|
|
|
SMTC-X170
This speciality long reach tip is designed drag soldering. The end of the tip is concave, simply melt a little solder into the recess and apply to the lead out. Then procede to smoothly slide from lead to lead to create a perfect joint.Ideal for replacing gull wing devices and removing solder shorts.
|
|
|
|
|
SMTC-X147
This speciality tip is designed drag soldering. The end of the tip is concave, simply melt a little solder into the recess and apply to the lead out. Then procede to smoothly slide from lead to lead to create a perfect joint.Ideal for replacing gull wing devices and removing solder shorts.
|
|
|
|
|
SMTC-X167
This speciality mini-hoof tip is designed drag soldering. The end of the tip is concave, simply melt a little solder into the recess and apply to the lead out. Then procede to smoothly slide from lead to lead to create a perfect joint.Ideal for replacing gull wing devices and removing solder shorts.
|
|
|
|
|
SMTC-X169
This speciality long reach tip is designed drag soldering. The end of the tip is concave, simply melt a little solder into the recess and apply to the lead out. Then procede to smoothly slide from lead to lead to create a perfect joint.Ideal for replacing gull wing devices and removing solder shorts.
|
|
|
|
|
SMTC-X161
The knife tip geometry with a tinned area 2.03 mm can be used in a similiar way to that of the hoof tip range in that it is designed to remove solder shorts and reflow the solder joints on a number of lead outs.
|
|
|
|
|
SMTC-X173
This knife tip with an increased tinned area is suitable for drag soldering and debridging between component devices.
|
|
|
|
|
SMTC-X171
Designed to remove 0201 and 0402 components from a topside angle. This design increases microscope viewing when reworking / removing micro chip capacitors /components.
|
|
|
|
|
SMTC-X172
Designed for fine drag soldering and point to point soldering.This tip increases access between components and allows for leadlead to lead or solder bridge clean-up
|
|
|
|
|
SMTC-X174
Long reach micro hoof tip designed with a smaller surface area than the mini hoof for optimal drag soldering of components intight spots.
|
|
|
|
|
SMTC-X175
Micro-hoof tip designed with a smaller surface area than the mini hoof drag soldering of small / micro leaded components.
|
|
|
|
|
STTC-X90
Microfine tip designed for soldering and touch-up of micro components such as 0201 and 0402.
|
|
|
|
|
|
STTC-X01P
Conical Sharp 1mm
These tips are only available in the 700 series temperature range.
|
|
|
|
|
|
STTC-X25P
Chisel 30 degrees 1mm wide.
This tip is only available in 700 series temperature range.
|
|
|
|
|
|
STTC-X36P
Chisel 30 degrees 2.5 mm wide
This soldering cartridge is only available in 700 series temperature range.
|
|
|
|
|
|
STTC-X37P
Chisel 30 degrees 1.8 mm wide.
This soldering cartridge is only available in 700 series temperature range
|
|
|
|
|
|
STTC-X45P
Conical 0.4 mm
This soldering cartridge is only available in 700 series temperature range.
|
|
|
|
|
|
STTC-X47P
Bevel 60 degrees 1.78 mm wide
This soldering cartridge is only available in 700 series temperature range.
|
|
|
|
|
|
STTC-X173P
Knife 5.0 mm wide
This soldering cartridge is only available in 700 series temperature range.
|
|
|
|
|
|
STTC-X15
Bevel 30
|
|
|
|
|
|
STTC-X97
Groved Semi-Rigid Coax Cable
|
|
|
|
