|
|
||||||||
|
|||||||||
- Soldering Materials
- Stencils
- Soldering Systems
- Fume Extraction
- Inspection Equipment
- Non-Contact Measurement
- PCB Assembly Accessories
- Printing Consumables
- Profiling
- Workstations
- Dispensing
Lead Free Products
|
ALPHA VACULOY LEAD FREE SAC 305 SOLDER ALLOY The most common choice for wave soldering today is that of SAC305 this alloy is based on Tin 96.5%/ Silver 3.0% / Copper 0.5%. Price: £ POA |
|
|
|
ALPHA VACULOY LEAD FREE SACX SOLDER ALLOY The SACX alloy has been developed by Alpha as an alternative when considering the change to lead free wave soldering. The alloy exhibits similiar performance parameters to that of SAC305 but due to its lower Silver percentage (0.3%) it gives you the added benefit of a lower purchase cost. Price: £ POA |
|
|
ALPHA VACULOY SACX DT 0307 Alpha Vaculoy SACX DT 0307 is a lead-free alloy suitable for use as a replacement for Sn63 alloy in the dip tinning process or in mini wave rework. The SACX DT 0300 variant is used to stabilize/reduce the copper content in dip tinning pot or mini wave pot, this requirement will depend on process conditions. This alloy is a variant of the SACX alloy for wave solder, and is compatible with the SACX wave alloy when used in mini pot rework. As with all Alpha Metals bar solder, Alpha's proprietary Vaculoy alloying process is used to remove certain impurities, particularly oxides. The product is further enhanced with the addition of 3 minor elements to reduce copper dissolution, dross formation and improve the joint cosmetics. Price: £ POA |
|
|
|
ALPHA VACULOY SACX0307 HASL ALPHA Vaculoy SACX0307 HASL is a lead-free alloy suitable for use as a replacement for Sn63 alloy in the hot air solder level process. Price: £ POA |
|
|
ALPHA WS819 LEAD FREE WATER SOLUBLE SOLDER PASTE This water soluble solder paste is one of the latest in a range of products offering the ideal combination of printability under varying enviromental conditions, 8 hr stencil life, good resistance to BGA voiding, high speed combined with excellent cleanability with waterbased cleaning systems. Price: £ POA |
|
|
ATH-1000 ADJUSTABLE PCB HOLDER The ATH-1000 Adjustable tool Holder is designed to work with the HCT-1000 or as part of the MRS-1000 System. The tool holder features a board holder, locking hand-piece retainer, Z axis stop and mounting configurations for stand-alone operation or integrated as part of the MRS-1000. The ATH-1000 is sturdy and easy to attach to the PCT-1000 Programmable Preheater when incorporated into the MRS System. Two Adjustable Tool Holder models are available: • The ATH-1000A uses the Advanced Head Assembly which features 4" of Z axis adjustment, 1/2" fine adjustment of the X & Y axis as well as 30° θ adjustment. Price: £ POA |
|
|
BH-1000 POST-RAIL BOARD HOLDER SYSTEM. The Post-Rail Board Holder System when used inconjunction with the PCT-1000 offers the assembly facility an excellent cost effective rework platform which will accomodate all sizes of PCB design. The kit contains four posts, two rails with sliding clips, four support pins, flat-head support screws.
Price: £ POA |
|
|
Frys Fryolux T1333 Pure Tin Convenient and economical to use, applied easily by brush swab or spray, to cold surfaces and then heated to melt the solder and make the joints. Only a thin coat is needed and as the solder and flux are both applied at once it saves time. Price: £ POA |
|
|
Lead Free Flux Remover LFFR Specifically designed for the removal of lead free fluxes after soldering. Proven to work well with both solder wire and solder paste flux technologies. Price: £ POA |
|
|
Metcal APR-5000 "Metcals latesest array package rework system incorporates state of the art vision, closed loop time temperature and airflow cntrol with powerful software makes the reworking of the most complex package simple and striaght forward. " Price: £ POA |
|
