PCB Assembly Materials

Anti Static Flux Dispensing Bottle

This 2oz flux dispensing bottle is ideal for controlled applications of rework fluxes being moulded anti static plastic and comes complete with fine needle adapter

Price: £ POA

Blue Hygenic Disposable Gloves

These light weight vinyl gloves should be used to protect your hands when cleaning solder paste from stencils together with paint or adhesive applications.

Price: £ POA

Flux Dispensing Bottles

FLOW-SEAL Environmental Bottles control the application of cleaning and preparing fluids. Standard reservoir and open top type bottles allow fluids to evaporate in the working area. With FLOW-SEAL this is prevented, thereby saving cost, delivering the product where it is needed and helping to improve working conditions. FLOW-SEAL Bottles are available in 2oz and 4oz sizes, with interchangable nib types to suit the material and application.

Price: £ POA

Inspection Arrows

Colourful identification and inspection arrows identify problems and point directly to the areas requiring action on pcb's and other equipment.

Price: £ POA

Ionograph Liquid 75-25

Cleaning solution used in the Ionograh and Omegameter Ionic

Price: £ POA

Kleenox P Dross Reducer

Use only a small amount of this powder when performing daily maintence on the flow solder machine. This product should not be used as a general dross reducer acrooss the whole wave. Move the dross to one end of the bath apply the Kleenox product and cut into the dross formation to return the metal to the pot.

Price: £ POA

Lev-Check Solder Wave Gauge

The LEV CHEK Solder Wave Gauge is a custom tempered glass panel made similar in size and shape to a printed circuit board and is designed to be used on wave soldering equipment to monitor flux coverage, wave shape, wave turbulence, leveling of the conveyor and other soldering quality factors. Heat resistant gauge markings are printed on the top surface of the LEV CHEK glass in

Price: £ POA

Menda Solvent Dispensing Pumps

Patented pumps protect against cross-contamination, by preventing fluid, once pumped into stainless dish, from returning into dispenser

Price: £ POA

MICROCARE STATIC SAFE BENCH MOUNTING KIT

The Bench Mounting Kit from MicroCare is designed for use with the SolventMiser Trigger Grip systems and the alternative solvents from MicroCare. 


The Bench Mounting Kit holds both the canister and the Trigger Grip neatly at the workbench. It minimizes stress on the Trigger Grip hose, so each Trigger Grip will last longer. It also keep the cans from tipping and falling over, which can break the tops off the cans and could be a safety hazard. 


 Note: The new "BK3" version of the Bench Mounting Kit is required to work with the new, more ergonomic Trigger Grip system. If you have older versions that do not fit, MicroCare will provide replacements parts free of charge. Contract MicroCare for details.

Price: £ POA

Shaft Lube Anti Oxidant

Shaft lube has been designed to be used around the pump impellor of the wave solder machine. This is an area where vortexing happens and oxide from the wave surface is transport by the spindle back into the bulk solder and will then reappear on the wave.

Price: £ POA