TX Series The TX Series of products is designed for tip extraction from soldering irons. This is a very economical and effective method of fume removal as all fumes are removed at the source. Custom Installation and Installation ducting kits are available. A balance valve ensures correct flow rates at the extraction tube and a pressure relief valve eliminates motor overheating. A choice of filtration levels are available for each system, depending on your application.

TX080 Series Ordering Guide:

TX080 Series Specifications

• Static Pressure: 8300 Pa (33 in of H20)
• Flow Rates: 40 m3/hr (24 CFM) free blowing
• System Capacity: 5.6mm tubes: 1-8 operators
• System Capacity: 8mm tubes: 1-3 operators
• System Capacity: Micro Arms: 1-3 operators
• Noise Level: 52 dBA
• Weight: 19 kg (42 lbs)
• Input Port: 1 x 32mm dia
• Size HxWxD: 525x365x355mm (21"x14.5"x14")
• Max Duct Run: 50m (150')
• Power: 400 W, 4A

TX150 Series Ordering Guide:
For alternative voltages and frequencies in certain Asian markets, please contact your local distributor.

TX150 Series Specifications

• Static Pressure: 17000 Pa (68 in of H20)
• Flow Rates: 80 m3/hr (48 CFM) free blowing
• System Capacity: 5.6mm tubes: 1-15 operators
• System Capacity: 8mm tubes: 1-5 operators
• System Capacity: Micro Arms: 1-5 operators
• Noise Level: 54 dBA
• Weight: 32 kg (70 lbs)
• Input Port: 1 x 32mm dia
• Size HxWxD: 575x426x431mm (23"x17"x17")
• Max Duct Run: 100m (300')
• Power: 600 W, 7A