| MX-500S-21
Rework Tips
SMT Rework Tip Cartridges
Designed for reworking SMT components, SMTC tip cartridges do
it all - assembly, removal and cleaning. The SMTC range includes
slot, tunnel and quad tip cartridges. The SMTC range also includes
hoof tips for drag soldering, blade tips to remove residual solder
from pads, and knife tips for multi-lead soldering of PLCCs in
tight places.
Please note: SMTC soldering tip cartridges
are for use with the MX-RM3E soldering/rework hand-pieces for
STSS/MX systems only. They cannot be used with SP systems, Talon® hand-pieces
or desolder hand-pieces.
SLOT TIP CARTRIDGES
DIMENSIONS IN INCHES (mm) |
 |
| SMT TYPE |
A |
B |
D |
Part No. |
| Chip 0805 |
.090 (2.29) |
.050 (1.27) |
.070 (1.79 |
SMTC-X01 |
| Chip 1206, 1210 |
.140 (3.56) |
.060 (1.52) |
.070 (1.79) |
SMTC-X02 |
| Chip 1808, 1812 |
.190 (4.83) |
.080 (2.03) |
.075 (1.91) |
SMTC-X03 |
| Chip, Box A (EIA SOPM-3224) |
.135 (3.43) |
.080 (2.03) |
.120 (3.05) |
SMTC-X35 |
| Chip, Box B (EIA SOPM-3528) |
.150 (3.81) |
.095 (2.41) |
.100 (2.54) |
SMTC-X32 |
| Melf, Box B (EIA SOPM-4532) |
.190 (4.83) |
.110 (2.79) |
.160 (4.06) |
SMTC-X36 |
| Chip, Box C (EIA SOPM-6032) |
.250 (6.35) |
.095 (2.41) |
.130 (3.30) |
SMTC-X33* |
| Chip, Box D (EIA SOPM-7246) |
.300 (7.62) |
.100 (2.54) |
.140 (3.56) |
SMTCX34* |
| SOT-23 |
.068 (1.73) |
.100 (2.54) |
.050 (1.27) |
SMTC-X05 |
| SOT-89 |
.110 (2.80) |
.250 (6.35) |
.080 (2.03) |
SMTC-X08 |
| Chip 0402, 0603, 0805
(angled) |
.080 (2.03) |
.050 (1.27) |
.060 (1.52) |
SMTC-X88 |
| Chip 0402, 0603 |
.070 (1.78) |
.040 (1.02) |
.040 (1.02) |
SMTC-X96 |
500 series x=5 600 series x=0 700 series x=1
*=NOT available for 500 series
TUNNEL TIP CARTRIDGES FOR DUAL IN-LINE
PACKAGES
DIMENSIONS IN INCHES (mm) |
 |
| SMT TYPE |
A2 |
A |
B |
D |
Part No. |
| DPAC |
.335 (8.51) |
.335 (8.51) |
.250 (6.35) |
.200 (5.08) |
SMTC-X47 |
| SO-8 |
.320 (8.13) |
.380 (9.65) |
.750 (19.05) |
.240 (6.10) |
SMTC-X107 |
| SO-16 |
.330 (8.38) |
.330 (8.38) |
.475 (12.07) |
.230 (5.84) |
SMTC-X46* |
| SO-8 |
.335 (8.51) |
.335 (8.51) |
.665 (16.90) |
.250 (6.35) |
SMTC-X68** |
| SOIC-8 |
.200 (5.08) |
.200 (5.08) |
.170 (4.32) |
.090 (2.29) |
SMTC-X04 |
| SOIC-14,-16 |
.200 (5.08) |
.200 (5.08) |
.400 (10.16) |
.090 (2.29) |
SMTC-X06 |
| SOIC-14 |
.204 (5.18) |
.204 (5.18) |
.350 (8.89) |
.100 (2.54) |
SMTC-X142 |
| SOIC-24 (Mini flat pack) |
.280 (7.11) |
.280 (7.11) |
.620 (15.75) |
.125 (3.18) |
SMTC-X77 |
| SOIC-16 (Wide) |
.320 (8.13) |
.320 (8.13) |
.470 (11.94) |
.270 (6.86) |
SMTC-X124 |
| SOIC-20 |
.375 (9.53) |
.375 (9.53) |
.520 (13.21) |
.125 (3.18) |
SMTC-X10 |
| SOIC-24 |
.375 (9.53) |
.375 (9.53) |
.620 (15.75) |
.125 (3.18) |
SMTC-X09 |
| SOIC-28, SOL-34 |
.375 (9.53) |
.375 (9.53) |
.720 (18.29) |
.125 (3.18) |
SMTC-X07 |
| SOIC-32 |
.520 (13.21) |
.520 (13.21) |
.805 (20.45) |
.170 (4.32) |
SMTC-X42 |
| SOJ-28, SOM-36 |
.315 (8.00) |
.340 (8.64) |
.740 (18.80) |
.074 (1.88) |
SMTC-X26 |
| SOJ-32, 34 |
.315 (8.00) |
.340 (8.64) |
.840 (21.34) |
.125 (3.18) |
SMTC-X140 |
| SOJ-40, SOM-32 |
.410 (10.41) |
.450 (11.43) |
1.020 (25.91) |
.075(1.91) |
SMTC-X40 |
| SOJ-42 |
.410 (10.41) |
.450 (11.43) |
1.070 (27.18) |
.125 (3.18) |
SMTC-X148 |
| SOMC-14,-16, DB-20 |
.270 (6.86) |
.270 (6.86) |
.440 (11.18) |
.090 (2.29) |
SMTC-X20 |
| SOP-20 |
.270 (6.86) |
.270 (6.86) |
.285 (7.24) |
.100 (2.54) |
SMTC-X138 |
| SOP-28 |
.420 (10.67) |
.420 (10.67) |
.720 (18.29) |
.125 (3.18) |
SMTC-X39 |
| SOP-40 |
.460 (11.68) |
.510 (12.95) |
1.000 (25.4) |
.125 (3.18) |
SMTC-X134* |
| SOP-44 |
.510 (12.95) |
.565 (14.35) |
1.070 (27.18) |
.105 (2.67) |
SMTC-X83 |
| TSOP-28 |
.470 (11.94) |
.505 (12.83) |
.320 (8.13) |
.065 (1.65) |
SMTC-X95 |
| TSOP-40 |
.730 (18.54) |
.760 (19.30) |
.400 (10.16) |
.120 (3.05) |
SMTC-X154 |
| TSOP-56 |
.730 (18.54) |
.760 (19.30) |
.556 (14.12) |
.120 (3.05) |
SMTC-X162 |
| TSOP-32 |
.730 (18.54) |
.760 (19.30) |
.320 (8.13) |
.120 (3.05) |
SMTC-X84** |
600 series x=0 700 series x=1 *=NOT available for
600 series
**=NOT available for 700 series
QUAD TIP CARTRIDGES FOR PLCC
DIMENSIONS IN INCHES (mm) |
 |
| SMT
TYPE |
A2 |
A |
B2 |
B |
D |
Part No. |
| PLCC 18 |
.300 (7.62) |
.330 (8.38) |
.500 (12.70) |
.530 (13.46) |
.150 (3.81) |
SMTC-X11 |
| PLCC 20 |
.360 (9.14) |
.400 (10.16) |
.360 (9.14) |
.400 (10.16) |
.150 (3.81) |
SMTC-X12 |
| PLCC 28 |
.370 (9.40) |
.410 (10.41) |
.570 (14.48) |
.610 (15.49) |
.150 (3.81) |
SMTC-X103 |
| PLCC 32 |
.450 (11.43) |
.500 (12.70) |
.550 (13.97) |
.600 (15.24) |
.150 (3.81) |
SMTC-X16 |
| PLCC 28 |
.455 (11.56) |
.500 (12.70) |
.455 (11.58) |
.500 (12.70) |
.150 (3.81) |
SMTC-X13 |
| PLCC 44 |
.660 (16.76) |
.700 (17.78) |
.660 (16.76) |
.700 (17.78) |
.150 (3.81) |
SMTC-X14 |
| PLCC 68 |
.960 (24.38) |
.995 (25.27) |
.960 (24.38) |
.995 (25.27) |
.220 (5.59) |
SMTC-X18* |
| PLCC 68 dual |
.960 (24.38) |
.995 (25.27) |
.960 (24.38) |
.995 (25.27) |
.220 (5.59) |
SMTC-X28 |
| PLCC 84 dual |
1.165 (29.59) |
1.195(30.35) |
1.165 (29.59) |
1.195 (30.35) |
.220 (5.59) |
SMTC-X29 |
| PLCC 52 |
.760 (19.30) |
.800 (20.32) |
.760 (19.30) |
.800 (20.32) |
.150 (3.81) |
SMTC-X17* |
| PLCC 84 |
1.165 (29.59) |
1.195 (30.35) |
1.165 (29.59) |
1.195 (30.35) |
.220 (5.59) |
SMTC-X19* |
600 series x=0 700 series x=1 for all quads use 700
SERIES tip cartridges
*=NOT available for 600 series
Please note: Dual tip cartridges require two power
supply units and two hand-pieces. A Dual Hand-Piece Support
(MX-DHS) is also recommended.
QUAD TIP CARTRIDGES FOR QFP
DIMENSIONS IN INCHES (mm) |
|
| SMT TYPE |
A2 |
A |
B |
B2 |
D |
Part No.
|
| SQFP 48 (EIAJ) |
.330 (8.38) |
.330 (8.38) |
.330 (8.38) |
.330 (8.38) |
.100 (2.54) |
SMTC-X121 |
| SQFP 64 (EIAJ) |
.440 (11.18) |
.440 (11.18) |
.440 (11.18) |
.440 (11.18) |
.100 (2.54) |
SMTC-X120 |
| TQFP 44 |
.440 (11.18) |
.480 (12.19) |
.480 (12.19) |
.520 (13.21) |
.110 (2.79) |
SMTC-X159 |
| TQFP 80 |
.485 (12.32) |
.525 (13.34) |
.485 (12.32) |
.525 (13.34) |
.110 (2.79) |
SMTC-X132 |
| QFP 48 |
.550 (13.97) |
.550 (13.97) |
.550 (13.97) |
.550 (13.97) |
.130 (3.30) |
SMTC-X115 |
| VQFP 100 (EIAJ) |
.570 (14.48) |
.610 (15.49) |
.570 (14.48) |
.610 (15.49) |
.110 (2.79) |
SMTC-X118 |
| QFP 128 (3.2 mm fp) |
.620 (15.75) |
.620 (15.75) |
.860 (21.84) |
.860 (21.84) |
.130 (3.30) |
SMTC-X133 |
| QFP 44 |
.635 (16.13) |
.635 (16.13) |
.635 (16.13) |
.635 (16.13) |
.130 (3.30) |
SMTC-X21 |
| QFP 100 (rectangular) |
.650 (16.51) |
.650 (16.51) |
.885 (22.48) |
.885 (22.48) |
.130 (3.30) |
SMTC-X43 |
| QFP 64, 80 |
.675 (17.15) |
.675 (17.15) |
.910 (23.11) |
.910 (23.11) |
.130 (3.30) |
SMTC-X15 |
| QFP 100 |
.805 (20.45) |
.805 (20.45) |
.805 (20.45) |
.805 (20.45) |
.190 (4.83) |
SMTC-X45* |
| QFP 144 |
.805 (20.45) |
.840 (21.34) |
.805 (20.45) |
.840 (21.34) |
.075 (1.91) |
SMTC-X122 |
| QFP 132 |
.985(25.02) |
1.020(25.91) |
.985(25.02) |
1.020 (25.91) |
.125 (3.18) |
SMTC-X86 |
| QFP 100 (square) |
1.040 (26.42) |
1.040 (26.42) |
1.040 (26.42) |
1.040 (26.42) |
.130 (3.30) |
SMTC-X44* |
| QFP 208 DUAL |
1.125 (28.58) |
1.770 (44.96) |
1.125 (28.58) |
1.170 (44.96) |
.114 (2.90) |
SMTC-X81 |
| QFP 120,160 DUAL |
1.165 (29.59) |
1.200 (30.48) |
1.165 (29.59) |
1.200 (30.48) |
.120 (3.05) |
SMTC-X48 |
| PQFP 240 DUAL |
1.290 (32.77) |
1.330 (33.78) |
1.290 (32.77) |
1.330 (33.78) |
.110 (2.79) |
SMTC-X125 |
| QFP 304 DUAL |
1.600 (40.64) |
1.650 (41.91) |
1.650 (41.91) |
1.600 (40.64) |
.200 (5.08) |
SMTC-X158** |
600 series x=0 700 series x=1 for all quads use 700
series tip cartridges
*= Not recommended for 600 series **= not AVAILABLE FOR 600
SERIES
Please Note: Dual tip cartridges require two powersupply units
and two hand-pieces. A Dual Hand-Piece Support (MX-DHS) is
also recommended.
SOCKET TIP CARTRIDGES (TIP INSIDE SOCKET)
|
|
| Recommended SMD Component |
A |
B |
D |
Recommended
Part No. |
Part No. |
| PLCC-20
SOCKET |
.360 (9.14) |
.556 (14.12) |
.115 (2.91) |
SMTC-X144 |
SMTC-1144 |
| PLCC-32 SOCKET |
.456 (11.58) |
.556 (14.12) |
.120 (3.05) |
SMTC-X109 |
SMTC-1109 |
| PLCC-84 SOCKET
DUAL |
1.160(40.64) |
1.160(40.64) |
.115(2.91) |
SMTC-X145 |
SMTC-1145 |
600 series x=0 700 series x=1
for all quads use 700 series tip cartridges
Please Note: oDual tip cartridges require
two power supply units and two hand-pieces. A Dual
Hand-Piece Support (MX-DHS) is also recommended.
|
|
