UV Sensor & AeroMOLE

UV Sensor

The UV Profile Sensor enables the measurement of intensity and dosage for ultraviolet curing processes with the SuperMOLE Gold and ECD’s latest software. Simply tell the program which channel9s0 have the UV sensor plugged, select sampling parameters and you’re ready to run.

• Profiles UV intensity and ttal exposure
• Multiple sensors can be used for 3.D profiling
• May be sued in combination with thermocouples
• Also compatible with SuperMOLE Gold RF

Applications

ECD’s UV Sensor is intended for application in processes that use ultraviolet radiation as the energy source, particularly for curing UV finishes and conformal coatings. When channels are selected for the UV Sensor, the graph displays intensity in mW/Sq inch or cm, and total exposure (dosage) in joules over a user-selected time period

Display/Readout:

For use with ECD SuperMOLE profilers

Spectral sensitivity:

Approximately 230-430 nm

Intensity Range:

0-5 watts

UV Sensor:

Solid-state construction; chrome-plated steel

Dimensions:

Diameter 76mm (3”)

 

AeroM.O.L.E.

The AeroMOLE air velocity profiler provides the means to adjust and maintain convection fan speeds and oven baffle settings thus avoiding the trial-and-error method of oven balancing. Use AeroMOLE with a SuperMOLE Gold RF during maintenance so you can view adjustments in real-time as job the conveyor

Application

The AeroMOLE is commonly used to determine the highest convection fan settings without blowing tiny SMT components off the board or mislocating them before they are soldered.

User Friendly

Now you can profile air velocity levels as easily as you profile temperatures. Profile three channels of air velocity horizontally or vertically from 0-17.82 m/s (0-3.500 fpm), utilizing your SuperMOLE and ECD profiling software.

Display/Readout:

For use with ECD SuperMOLE profilers

Range:

0-17.82 m/s (0-3500FPM)

Operating Temperature:

10-50 C (50-122 F)

Resolution:

1 FPM (0.005m/s)