Standard TEMPROBE (Model B) |
| Maximum reach radius |
5.5 in (14 cm) |
| Height with clamp |
0.55 to 0.49 (14 to 12.5 mm) above PCB |
| Probe Weight |
14 gpm (less cable & connector) |
| Probe material |
Stainless Steel |
| Temperature limit |
530° F (270° C) |
| Sensor |
Type K junction (Type J avail.) |
| Lead wire |
24 in. (60
cm) long, with Kapton® insulation |
| Connector |
Subminiature thermocouple connector |
| (SuperM.O.L.E.® Gold connector
available) |
| Limits of error |
Less than ± 2.2° C (Per
ANSI MC 96.1) |
| Clamp |
Included — refer to detailed
specifications below |
| Ball joint |
Included — refer to detailed
specifications below |
Long Reach TEMPROBE (Model B-L) |
| Max. reach radius |
11.5 in. (30 cm) |
| Probe weight |
22 gm (less cable & connector) |
| Other specifications |
Same as Model B |
| High Temperature TEMPROBE (Model B-HT) |
| Temperature limit |
900°F (480° C) |
| Probe Weight |
14 gm (less cable & connector) |
| Lead wire |
36 in (90 cm) long, with fiberglass insulation |
| Connector |
Ceramic subminiature thermocouple connector |
| Other specifications |
Same as Model B |
| Clamp (CLA): Included with all models |
| Weight |
15 gm |
| PCB thickness |
Up to 0.30 in (7.6 mm) |
| Sensor capacity |
1 or 2 probes |
| Bottom plate materials |
Titanium |
| Ball Joint (BJ): Included with all models |
| Weight |
12 gm |
| Accessories |
| Extension cable: 1 channel (Model EC-1), 2 Channel
(Model EC-2), 3 Channel (Model EC-3) |
| Length |
15 ft. (4.6 m) |
| Connectors |
Subminiature male and female thermocouple connectors |
| Conductors |
24 gauge stranded thermocouple extension wire,
twisted |
| Insulation |
Kapton® over individual conductors
and over the wire bundle |
| Temperature limit |
530° F (275° C) |
| Other lengths and connectors available |
